C-Tec BF562-3/E 24V 3A 5 Series Encased Power Supply PCB ONLY, Mains Fail Simulation Mode.

Price: £139.60
(as of Aug 05, 2025 17:08:55 UTC – Details)


✅C-Tec 24V 3A 5 Series Encased Power Supply PCB ONLY (BF562-3/E)
The BF562-3/E can be optionally customised to suit your exact requirements using a BF423 configurator and PC. Configurable parameters include Float voltage temperature compensation; Battery charge rate (mA); Battery impedance; Configurable Input/Output settings.
✅Key Features
A powerful switch mode/digital hybrid PSU that can be customised to suit your exact requirements.
Plastic cover on PSU PCB guards against touching live parts (to VDE 0100-410).
Includes the same electronics as our BF562-3/E LPCB certified EN54-4/A2 boxed 24V 3A PSU.
Metal base plate facilitates straightforward mounting inside third-party OEM enclosures.
Includes a single-pole volt-free changeover relay that switches for any fault condition.
Includes a fault type & hazardous voltages present LED.
Two selectable battery charge currents.
Battery fault impedance limits can be optimised to suit load current (helps extend battery life).
Mains fail simulation mode.
Improved on-board temperature sensor with optional remote sensor.
Electronic functions comply with EN50131-6 grades 1-4 for security applications.
Optional PCB-only version (without a metal base plate) available.
✅Specifications
Approvals/certifications
Includes the same electronics as our EN54-4/A2 certified BF562-3 PSU
Compatibility
*** Full compliance with all relevant standards must be checked by the responsible person with the caged PSU installed in a suitable enclosure ***
Application/operation
An encased Mains to regulated DC switch-mode/digital hybrid power supply providing 3A @ 24V DC. It includes a single pole volt-free changeover relay that switches for any fault condition. User cust
Mains supply
230V 50/60Hz.
Mains rated current
800mA r.m.s.
Total output current limited to
3A (Max. output current).
Output
I max.a: 2.6A or 2A selectable. A load greater than I max.a will temporarily reduce batt. charging. I.max.b: 3A, charging turned off via CONN6. Output is also customisable via a BF423 Configurator*
Battery charge capacity
2.5Ah up to 17Ah (battery charged to 80% capacity in 24hrs). Output is customisable via a BF423 Configurator to suit different manufacturers’ batteries*.
Max battery size and type
Up to 17Ah VRLA dependent on the size of the enclosure the BF562-3/E is mounted in.
Indicators
Supply Present (Green); General Fault (Amber); Auxiliary Fault (Amber); Hazardous Voltages Present (Red).
Connections
Mains Input (CONN1); Supply Output (CONN3); Battery Input (CONN3); Fault Relay (CONN4); Charge Off Input (CONN5). Battery Charge Current Link (PLK1); Battery Monitoring On/Off Link (PLK2); High Tem
Expansion connections
A remote thermistor can be connected via PL3 terminals.
Product dimensions (mm)
143mm H x 173mm W x 66mm D.
Construction & finish
Zintec base, polycarbonate cover.
IP Rating
Dependent on mounting enclosure.
Weight
665g (without batteries).
Operating conditions/temperature
-5ºC to +40ºC. Max relative humidity: 95%.
Notes
*Parameters configurable via a BF423 configurator are: Float voltage temp. compensation; Batt. charge rate (mA); Batt. impedance; Configurable Input/Output settings.
Date First Available ‏ : ‎ 6 May 2025
Manufacturer ‏ : ‎ C-Tec Security
ASIN ‏ : ‎ B0F7M89NS4
Item model number ‏ : ‎ BF562-3/E
Guaranteed software updates until ‏ : ‎ unknown
Plastic cover on PSU PCB guards against touching live parts (to VDE 0100-410).
Includes the same electronics as our BF562-3 LPCB/VDS certified EN54-4/A2 boxed 24V 3A PSU.
Metal base plate facilitates straightforward mounting inside third-party OEM enclosures.
Includes a single-pole volt-free changeover relay that switches for any fault condition.
Includes a fault type & hazardous voltages present LED.
Battery fault impedance limits can be optimised to suit load current (helps extend battery life)*.